ELECTRO MAGNETIC COMPONENTS, INC. - ELECTROMAG
Manufacturers of long life, high quality atm parts, magnetic heads and rollers
OR +001 619 470 2650

What to do when it comes to ATM Maintenance Parts

An ATM machine that is not working is going to make plenty of people mad. The people that want to get money, but are unable to access will end up looking elsewhere. The operator of the machine will lose the fees that they collect when the machine is not being used. It is not a good situation for anyone and the best way to avoid it is to do routine regular maintenance on the machine.

When a technician performs the maintenance they will be cleaning, fixing and replacing any certain ATM Maintenance parts that are most likely to break down over time. There are certain things that the routine maintenance should include.

  • Inspecting and cleaner any rollers – The rollers are the part of the machine that allows the money to be dispensed. They can also be used for the card reader. When the rollers work properly the money or the card is dispensed from the machine with ease. The maintenance of these can include cleaning if dirt or grease has accumulated on them. If they are worn down, they should be replaced. A good technician will have the NCR ATM parts on hand to handle this part of the maintenance.
  • Replacing the receipt tape – One thing that will always run out on an ATM machine is the receipt paper. Part of the maintenance includes changing the paper before it runs out. The technician should have these basic ATM maintenance parts on them at all times. If another person has access to the machine and can replace the paper, they should also have this on hand.
  • Cleaning the printer heads – Dirt and grime can cause the printer heads to function poorly. Par to the maintenance routine should include cleaning these printer heads. If they are damaged or wearing out, they can also be replaced.
  • Inspecting the cash dispenser – If this is not working properly, the money can be dispensed wrong and that will cause a lot of problems. Inspecting, cleaning and if necessary, replacing these NCR ATM parts is the cure for this problem.
  • Cleaning the screen – Touch screens are very common, problems with touchscreens are also very common. They should be cleaned on a regular basis. The technician should also be able to calibrate the screen to make sure that it is functioning the way it should.

Many people wonder how often this type of routine maintenance should be done. The answer is it depends on the ATM machine. The more the machine is used, the more often the maintenance should be performed. The environment is another factor. In dirty environments, cleaning the machine is much more important for making sure it is always working properly.